The MILWAUKEE® M18 FUEL™ 3/8" Mid-Torque Impact Wrench w/ Friction Ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 600 ft-lbs of nut-busting torque and only weighs 5.0 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. Milwaukee 3/8" Impact Wrench is the most compact in its class, giving users access to stubborn fasteners in spaces where larger impact wrenches can’t fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. MILWAUKEE® REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. MILWAUKEE® M18 REDLITHIUM™ XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases, and solvents.
-47%
Milwaukee M18 FUEL 1inch D Handle High Torque Impact Wrench ONE KEY (Bare Tool)
Original price was: 1,278.00$.999.00$Current price is: 999.00$.
Milwaukee M18 FUEL 3/8inch Compact Impact Wrench with Friction Ring Kit
Original price was: 832.00$.449.00$Current price is: 449.00$.
Milwaukee M18 FUEL 3/8inch Mid Torque Impact Wrench with Friction Ring Kit
Original price was: 896.00$.479.00$Current price is: 479.00$.
The MILWAUKEE® M18 FUEL™ 3/8″ Mid-Torque Impact Wrench w/ Friction Ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 600 ft-lbs of nut-busting torque and only weighs 5.0 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. Milwaukee 3/8″ Impact Wrench is the most compact in its class, giving users access to stubborn fasteners in spaces where larger impact wrenches can’t fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. MILWAUKEE® REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. MILWAUKEE® M18 REDLITHIUM™ XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases, and solvents.
Description
Reviews (6)
6 reviews for Milwaukee M18 FUEL 3/8inch Mid Torque Impact Wrench with Friction Ring Kit
Shipping & Delivery
Related products
Milwaukee M18 FUEL 1inch High Torque Impact Wrench with ONE-KEY Kit
The MILWAUKEE® M18 FUEL™ 1" High Torque Impact Wrench w/ ONE-KEY™ is the first cordless 1” High Torque Impact Wrench. The POWERSTATE™ Brushless Motor delivers up to 1,800 ft-lbs of Nut-Busting Torque and 1,500 ft-lbs of fastening torque, making this the most powerful cordless impact torque wrench, able to complete the most demanding applications. At only 13 lbs with battery, the tool is up to 7 lbs. lighter than corded units, providing less fatigue for easier overhead job site applications. The battery-powered impact wrench has cordless convenience and eliminates the need for compressors, generators, cords, and hoses, reducing the cost of ownership. A lack of reliance on cord and hoses allow for greater portability and the ability to complete applications unable to be performed with a corded or pneumatic unit. The REDLINK PLUS™ Intelligence achieves maximum performance and protects the high torque impact gun against overloads, over-heating, and over-discharge. M18™ REDLITHIUM™ Battery Packs are compatible with all M18™ tools, delivering more work per charge and more work over the life of the pack. The 4-Mode DRIVE CONTROL™ provides greater control over the output speed and power of the high power impact wrench. The ONE-KEY™ capabilities allows for Customization, Tracking, and Management of the impact wrench. ONE-KEY™ technology also provides the ability to set a repeatable torque output for maximum control.This kit also includes two M18™ HIGH OUTPUT™ XC8.0 batteries, an M18™ & M12™ Rapid Charger, and a contractor bag.
Milwaukee M18 FUEL 1inch D Handle Impact Wrench ONE KEY (Bare Tool)
The M18 FUEL™ 1" D-Handle High Torque Impact Wrench Extended Anvil w/ ONE-KEY™ is the world’s first cordless 1” D-Handle High Torque Impact Wrench. The POWERSTATE™ Brushless Motor delivers up to 2,000 ft-lbs of Nut-Busting Torque and 1,900 ft-lbs of fastening torque, making this the world's most powerful cordless impact wrench and enabling users to complete the most demanding applications. With the runtime to remove and install up to 120 lug nuts on a single HIGH OUTPUT™ HD12.0Ah battery, the tool provides unmatched performance. Lug Nut Mode, which can be enabled through the ONE-KEY™ app, prevents the over-torque of lugnuts using Auto Shut-Off™, providing more control. The REDLINK PLUS™ Intelligence ensures users achieve maximum performance and protects the High Torque Impact Wrench against overloads, over-heating, and over-discharge. M18™ REDLITHIUM™ Battery Packs are compatible with all M18™ tools, providing users with more work per charge and more work over the life of the pack. The 4-Mode DRIVE CONTROL™ provides users with greater control over the output speed and power of the powerful High Torque impact wrench . The ONE-KEY™ capabilities provide the user with the ability to Customize, Track and Manage the impact wrench. ONE-KEY™ technology also gives users the ability to set a repeatable torque output for maximum control. Battery and charger sold separately.
Milwaukee M18 FUEL Super Hawg Right Angle Drill with QUIK-LOK (Bare Tool)
The M18 FUEL™ Super Hawg™ delivers the power and run-time necessary to complete full cordless rough-ins. Optimized for plumbing, pipe fitting and HVAC professionals, this drill powers through 6-1/4 in. holes and can drill over (100) 2-9/16 in. holes per charge in 2x dimensional lumber with a self-feed bit. The POWERSTATE brushless motor generates the same power and speed in application as a corded right angle drill. REDLINK PLUS intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. The REDLITHIUM HIGH OUTPUT™ 6.0 batteries delivers the power and run-time necessary to complete cordless rough-ins. A mechanical clutch in low speed protects the tool from damage in the case that a bit binds up and the tool stalls. (Battery and charger sold separately) .
Milwaukee M18 FUEL Hole Hawg Right Angle Drill (Bare Tool) with QUIK-LOK
MILWAUKEE, WI – Milwaukee Tool continues to innovate in a category they invented 70 years ago by delivering ground-breaking performance with the introduction of the next generation of M18 FUEL™ HOLE HAWGS® with the power and speed to replace corded right angle drills. Designed from the ground-up with an upgraded POWERSTATE™ Brushless Motor and optimized REDLINK PLUS™ electronics and paired the REDLITHIUM™ HIGH OUTPUT™ 6.0AH Batteries, the new M18 FUEL™ HOLE HAWG® is the fastest in applications when drilling 7/8" ship augers, delivering the ability to perform the fastest rough-ins in the industry. The tool is the lightest in class at around 7lbs. When paired with the kitted paired the REDLITHIUM™ HIGH OUTPUT™ 6.0AH Batteries, the new M18 FUEL™ HOLE HAWG is able to drill up to 220 7/8" holes with a ship auger on a single charge.
Milwaukee M18 FUEL Hole Hawg Right Angle Drill Reconditioned (Bare Tool)
MILWAUKEE, WI – Milwaukee Tool continues to innovate in a category they invented 70 years ago by delivering ground-breaking performance with the introduction of the next generation of M18 FUEL™ HOLE HAWGS® with the power and speed to replace corded right angle drills. Designed from the ground-up with an upgraded POWERSTATE™ Brushless Motor and optimized REDLINK PLUS™ electronics and paired the REDLITHIUM™ HIGH OUTPUT™ 6.0AH Batteries, the new M18 FUEL™ HOLE HAWG® is the fastest in applications when drilling 7/8" ship augers, delivering the ability to perform the fastest rough-ins in the industry. The tool is the lightest in class at around 7lbs. When paired with the kitted paired the REDLITHIUM™ HIGH OUTPUT™ 6.0AH Batteries, the new M18 FUEL™ HOLE HAWG is able to drill up to 220 7/8" holes with a ship auger on a single charge.
Milwaukee M18 FUEL 1 1/8inch SDS Plus Rotary Hammer with ONE KEY (Bare Tool)
The MILWAUKEE® M18 FUEL™ 1-1/8" SDS Plus Rotary Hammer is the next generation of cordless rotary hammers delivering ultimate jobsite performance and productivity. The M18 FUEL™ 1-1/8" SDS Plus Rotary Hammer is the fastest drilling and hardest-hitting rotary hammer in its class with AUTOSTOP™ Control for enhanced safety, drilling up to 50 5/8" x 3" holes per charge when paired with the M18™ HIGH OUTPUT™ XC6.0 Battery. The POWERSTATE™ Brushless Motor delivers 3.6 ft-lbs of impact energy, 800 RPM, and 4,600 BPM, providing speed and power in the most demanding applications. REDLINK PLUS™ intelligence tool technology ensures maximum rotary drill performance and protects it from overload, overheating, and over-discharge. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery delivers 50% more power while running 50% cooler than the M18™ REDLITHIUM™ XC batteries. This cordless hammer drill provides maximum control and enhanced safety with the AUTOSTOP™ Kickback Control. This feature prevents over-rotation if the tool gets bound up while drilling in rebar or hard aggregate. Milwaukee's AVS Anti-Vibration System minimizes vibration for maximum comfort.
Milwaukee M18 FUEL 1/2 in High Torque Impact Wrench with Friction Ring Kit
The MILWAUKEE® M18 FUEL™ 1/2" High Torque Impact Wrench w/ Friction Ring is the most power-dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE™ Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque and 1,600 ft-lbs of Nut-Busting Torque when paired with the M18™ REDLITHIUM™ FORGE™ Batteries, while the compact size at 7.6" in length gives users greater access in tight spaces. The M18 FUEL™ 1/2" High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. The patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The 1/2" Friction Ring design allows for quick & tool-free socket changes.
Milwaukee M12 FUEL SURGE 1/4 in. Hex Hydraulic Driver 2 Battery Kit
The Milwaukee® M12™ FUEL™ SURGE™ 1/4 in. hex hydraulic driver is the industry's first 12 Volt hydraulic impact driver. The FLUID-DRIVE™ hydraulic powertrain's hydraulic impact allows for operation up to 2X quieter with less vibration for smoother and faster driving speeds. Its compact size provides unmatched access in tight spaces and allows for easy transport on a tool belt or in a tool bag. The POWERSTATE™ brushless motor delivers up to 0-3, 000 RPM with constant power output to drive screws faster. REDLINK Plus™ intelligence prevents damage to the tool and battery caused by overloading or overheating. The cordless impact driver is compatible with all M12™ REDLITHIUM™ compact batteries or extended capacity batteries, delivering more work per charge and more work over the life of the pack. The impact driver's 4-mode drive control delivers greater control over output speed and power for greater versatility. Self-tapping screw mode reduces walking when self-tapping screws as well as reduces overdriving, breaking and stripping out screws. In addition to the M12 FUEL™ SURGE™ 1/4 in. hex hydraulic driver, this kit includes two M12™ REDLITHIUM™ CP2.0 batteries and a contractor bag.
Josephine (verified owner) –
I wish there were more customization possible. The support is okay.
Jade (verified owner) –
Very flexible and well designed.
Brielle (verified owner) –
I rarely leave a comment, but this item is beyond worth it! Gotta let you guys know!
Vern (verified owner) –
I received a personalized and attentive treatment. Thanks to this deal, I was able to find a solution to my problem in a short time. 🙂
Justice (verified owner) –
I got excellent support for this item. They were patient with me, and helped me solve my issue. I recommend this company 100%
Everardo (verified owner) –
Sadly, the item was broken, but they offer me a refund so I’ll give a 3-star rating for the support