Milwaukee M18 Cordless Lithium-Ion 6-Tool Combo Kit
Use the powerful, reliable tools in the Milwaukee® M18™ Cordless LITHIUM-ION 6-Tool Combo Kit to tackle a range of tough tasks without tangling with any movement-restricting power cords. Using REDLITHIUM™ technology, these cordless tools rely on battery power instead of electrical sockets to drill, drive, and saw. Use the half inch Milwaukee hammer drill for 525 in-lbs of peak torque, and you can master stone and masonry with minimal effort. The Sawzall® uses counter balance systems to reduce vibration, and to ensure straight cuts. The quarter inch Milwaukee impact driver uses 1,400 in-lbs of torque to tighten and loosen all sorts of projects, and it does so with ease. Use the digital power management system to protect all these tools from overloads. The Milwaukee M18 Cordless 6-Tool Combo Kit comes with a full suite of features, and enough options for a variety of tasks.
Milwaukee M18 Cordless Lithium-Ion Right Angle Drill (Bare Tool)
Milwaukee's® 3/8" Chuck M18™ Cordless Right-Angle Drill features a small head that's only 3-3/4 inches wide, to fit between rafters or other tight spaces that are off-limits to traditional drills. It runs on the revolutionary M18 REDLITHIUM™ battery system, for longer running times and REDLINK™ technology for overload protection and better performance. You can adjust the electric right-angle drill's handle to a variety of different angles for even greater versatility. The electronic clutch features 11 different settings plus a drill mode to provide the precise power that you require for every task. This Milwaukee right-angle drill has a keyless chuck that allows you to switch out bits for different screws or hole sizes quickly so you can get right back to work. Onboard LEDs illuminate your workspace so you can safely see what you're doing.
Milwaukee M18 FORCE LOGIC Single Channel Strut Shear Kit
The MILWAUKEE® M18™ FORCELOGIC™ Single Channel Strut Shear is the Most Productive Way to Shear Strut on the jobsite. Utilizing Milwaukee® proprietary Shearing Dies, the Strut Shear delivers square, clean shears without additional filing or deburring. The integrated strut support plate offers a quick 4in/10cm measurement offset for simple, repeatable shears increasing productivity on site. The Strut Shear’s dual die design eliminates exposed blades and reduces the chance of cut and laceration injuries on jobsites. This highly portable Strut Shear offers unmatched versatility allowing you to easily shear on any flat surface or chain vice at the point of installation around the jobsite. The integrated tri-stand chain vice mount allows seamless integration into any brand chain vice to keep users productive. Featuring Milwaukee® ONE-KEY™ Technology, view tool usage, receive notifications for recommended maintenance, and lock the tool out for added security to protect your investment. The kit includes (1) 1-5/8” x 1-5/8” Single Channel Shearing Dies, (1) M18™ XC 5.0 REDLITHIUM™ Battery, M18™ and M12™ Multi-Voltage Charger and a soft-sided carrying bag with pockets that can accommodate (3) additional Shearing Die Sets. Additional Accessory Dies available: 13/16” x 1-5/8” Dies (49-16-1316), 7/8” x 1-5/8” Dies (49-16-0078), Combination 13/16” & 1-5/8” Dies (49-16-1513), and Combination 7/8” & 1-5/8” Dies (49-16-1578).
Milwaukee M18 FUEL 1 1/8inch SDS Plus Rotary Hammer with ONE KEY (Bare Tool)
The MILWAUKEE® M18 FUEL™ 1-1/8" SDS Plus Rotary Hammer is the next generation of cordless rotary hammers delivering ultimate jobsite performance and productivity. The M18 FUEL™ 1-1/8" SDS Plus Rotary Hammer is the fastest drilling and hardest-hitting rotary hammer in its class with AUTOSTOP™ Control for enhanced safety, drilling up to 50 5/8" x 3" holes per charge when paired with the M18™ HIGH OUTPUT™ XC6.0 Battery. The POWERSTATE™ Brushless Motor delivers 3.6 ft-lbs of impact energy, 800 RPM, and 4,600 BPM, providing speed and power in the most demanding applications. REDLINK PLUS™ intelligence tool technology ensures maximum rotary drill performance and protects it from overload, overheating, and over-discharge. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery delivers 50% more power while running 50% cooler than the M18™ REDLITHIUM™ XC batteries. This cordless hammer drill provides maximum control and enhanced safety with the AUTOSTOP™ Kickback Control. This feature prevents over-rotation if the tool gets bound up while drilling in rebar or hard aggregate. Milwaukee's AVS Anti-Vibration System minimizes vibration for maximum comfort.
Milwaukee M18 FUEL 1 in High Torque Impact Wrench with ONE-KEY (Bare Tool)
Our M18 FUEL™ 1 in. high torque impact wrench w/ ONE-KEY™ is the world’s first cordless 1 in. high torque impact wrench. The POWERSTATE™ brushless motor delivers up to 1,800 ft-lbs of nut-busting torque and 1,500 ft-lbs of fastening torque, making this the most powerful cordless impact wrench and enabling you to complete the most demanding applications. At only 12.9 lbs with battery, the tool is up to 7 lbs. lighter than corded units, providing you with less fatigue while making overhead applications easier to complete on the job site. The battery-powered impact wrench provides you with cordless convenience and eliminates your need for compressors, generators, cords, and hoses. This reduces your cost of ownership by lowering energy costs and eliminating routine maintenance on compressors and generators. With no cord or hose, you have greater portability and the ability to complete applications you were not able to do with a corded or pneumatic unit. The REDLINK Plus™ intelligence ensures you achieve maximum performance and protects your high torque impact wrench against overloads, over-heating, and over-discharge. M18™ REDLITHIUM™ battery packs are compatible with all M18™ tools, providing you with more work per charge and more work over the life of the pack. The 4-mode DRIVE CONTROL™ provides you with greater control over the output speed and power of the powerful high torque impact wrench . The ONE-KEY™ capabilities provide you with the ability to customize, track and manage the impact wrench. ONE-KEY™ Technology also gives you the ability to set a repeatable torque output for maximum control. Battery sold separately.
Milwaukee M18 FUEL 1 in. D-Handle High Torque Impact Wrench with ONE-KEY Kit
The MILWAUKEE® M18 FUEL™ 1" D-Handle High Torque Impact Wrench w/ ONE-KEY™ Kit is the world’s first cordless 1” D-Handle High Torque Impact Wrench. The POWERSTATE™ Brushless Motor delivers up to 2,000 ft-lbs of Nut-Busting Torque and 1,900 ft-lbs of fastening torque, making this the world's most powerful cordless impact wrench, able to complete the most demanding applications. With the runtime to install up to 200 1-1/4" bolts on a single HIGH OUTPUT™ HD12.0Ah battery, this tool provides unmatched performance. The battery-powered impact wrench offers cordless convenience and eliminates the need for compressors, generators, cords, and hoses. Achieve greater productivity and portability without the need for compressors or hoses to complete applications not accessible with pneumatic units, reducing the cost of ownership by lowering energy costs and eliminating maintenance on compressors and generators. The REDLINK PLUS™ Intelligence ensures maximum performance and protects the High Torque Impact Wrench against overloads, over-heating, and over-discharge. M18™ REDLITHIUM™ Battery Packs are compatible with all M18™ tools, providing more work per charge and more work over the life of the pack. A patented battery isolation system manages high frequency vibrations, enabling battery movement that prevents damage and ensures a constant connection between the battery and tool when in use. The 4-Mode DRIVE CONTROL™ provides greater control over the output speed and power of the High Torque Impact Wrench. The ONE-KEY™ Technology allows for customization, tracking, and management of the impact wrench with the ability to set a repeatable torque output for maximum control.
Milwaukee M18 FUEL 1/2 in Controlled Mid-Torque Impact Wrench (Bare Tool) with TORQUE-SENSE Pin Detent
The MILWAUKEE® M18 FUEL™ Controlled Torque Impact Wrench with TORQUE-SENSE™ are the industry’s most repeatable impact wrenches. TORQUE-SENSE™ torque control overcomes common variances seen on the jobsite, maintaining target torque better than competitive products that use blow counting algorithms. This performance is enabled by new to world sensors designed in-house by Milwaukee Tool that feed sophisticated machine learning algorithms. Every trigger pull is recorded, and data can be downloaded for customizable reporting to ensure confident installation. This cordless impact wrench is ideal for utility-scale solar projects, where eliminating the 2-step method on the jobsite can deliver up to 3X faster installation speed. Milwaukee offers best-in-class performance and application speed with FUEL™ technology, enabled by POWERSTATE™ brushless motors, REDLINK PLUS™ tool intelligence, and REDLITHIUM™ battery technology.
Milwaukee M18 FUEL 1/2 in Controlled Torque Compact Impact Wrench (Bare Tool) with TORQUE-SENSE Pin Detent
The MILWAUKEE® M18 FUEL™ Controlled Torque Impact Wrench with TORQUE-SENSE™ are the industry’s most repeatable impact wrenches. TORQUE-SENSE™ torque control overcomes common variances seen on the jobsite, maintaining target torque better than competitive products that use blow counting algorithms. This performance is enabled by new to world sensors designed in-house by Milwaukee Tool that feed sophisticated machine learning algorithms. Every trigger pull is recorded, and data can be downloaded for customizable reporting to ensure confident installation. This cordless impact wrench is ideal for utility-scale solar projects, where eliminating the 2-step method on the jobsite can deliver up to 3X faster installation speed. Milwaukee offers best-in-class performance and application speed with FUEL™ technology, enabled by POWERSTATE™ brushless motors, REDLINK PLUS™ tool intelligence, and REDLITHIUM™ battery technology.
Milwaukee M18 FUEL 1/2 in High Torque Impact Wrench with Friction Ring Kit
The MILWAUKEE® M18 FUEL™ 1/2" High Torque Impact Wrench w/ Friction Ring is the most power-dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE™ Brushless Motor delivers up to 1,100 ft-lbs of Fastening Torque and 1,600 ft-lbs of Nut-Busting Torque when paired with the M18™ REDLITHIUM™ FORGE™ Batteries, while the compact size at 7.6" in length gives users greater access in tight spaces. The M18 FUEL™ 1/2" High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. The patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The 1/2" Friction Ring design allows for quick & tool-free socket changes.
Milwaukee M18 FUEL 1/2 in Router (Bare Tool)
Designed for the professional carpenter and remodeler, the MILWAUKEE® M18 Fuel™ 1/2” Router delivers best-in-class cordless performance with 2.25 peak horsepower, the best control and comfort in application, and over 225 linear feet of runtime per charge. The POWERSTATE™ brushless motor delivers less bog down under load for clean, precise cuts and increased productivity. REDLINK PLUS™ intelligence ensures maximum performance and protection from overload, overheating, and over-discharge. The ergonomic BODYGRIP® and overmold pommels provide the best control and comfort in application to enhance precision and reduce fatigue. The M18™ REDLITHIUM™ HIGH OUTPUT XC6.0 battery pack (not included) provides up to 225 linear feet per charge of 5/8” roundovers in pine and the power to tackle the toughest applications found on the jobsite. The variable speed dial has an adjustment range from 25k to 12k RPM to optimize cuts across a wide range of bits and materials. The router is equipped with a micro-adjust knob and macro-adjust button with over 2” of travel to provide users with fast, accurate depth adjustments. The cordless router features dual-LED lights to illuminate the work surface, a spindle lock for quick one-wrench bit changes, and a modular console design for compatibility with the Milwaukee® 1/2” Router Plunge Base (not included).
Milwaukee M18 FUEL 1/2 in Router Kit
Designed for the professional carpenter and remodeler, the MILWAUKEE® M18 FUEL™ 1/2” Router delivers best-in-class cordless performance with 2.25 peak horsepower, the best control and comfort in application, and over 225 linear feet of runtime per charge. The POWERSTATE™ brushless motor delivers less bog down under load for clean, precise cuts and increased productivity. REDLINK PLUS™ intelligence ensures maximum performance and protection from overload, overheating, and over-discharge. The ergonomic BODYGRIP® and overmold pommels provide the best control and comfort in application to enhance precision and reduce fatigue. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 battery pack provides up to 225 linear feet per charge of 5/8” roundovers in pine and the power to tackle the toughest applications found on the jobsite. The variable speed dial has an adjustment range from 25k to 12k RPM to optimize cuts across a wide range of bits and materials. The router is equipped with a micro-adjust knob and macro-adjust button with over 2” of travel to provide users with fast, accurate depth adjustments. The included plunge base delivers smooth, consistent plunges with 2.5” of travel height. The cordless router features dual-LED lights to illuminate the work surface, a spindle lock for quick one-wrench bit changes, and a modular console design for compatibility with the Milwaukee® 1/2” Router Plunge Base.
Milwaukee M18 FUEL 1/2 Mid-Torque Impact Wrench with Pin Detent (Bare Tool)
The MILWAUKEE® M18 FUEL™ 1/2" Mid-Torque Impact Wrench w/ Pin Detent delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 650 ft-lbs of nut-busting torque and only weighs 5.1 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This battery-powered impact wrench is the most compact in its class, allowing access to stubborn fasteners in spaces where larger impact wrenches can’t fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ tools, delivering more work per charge and more work over the life of the pack.