Milwaukee M12 23 Gauge Pin Nailer (Bare Tool)
The MILWAUKEE® M12™ 23 Gauge Pin Nailer is the most compact cordless pin nailer, combining precision and power to deliver the performance that professional carpenters and remodelers demand, without the hassle of a compressor hose or gas cartridge. The 23 gauge pin nailer provides unmatched productivity and accessibility into tight spaces and confined corners with a lightweight, ergonomic design. The nitrogen air spring mechanism allows the nailer to consistently sink pin nails at proper depth into hard or softwoods while leaving small, clean nail holes. The double-action trigger and non-marring precision point tip allow for sequential driving and accurate pin placement into delicate trim pieces. The dry-fire lockout feature prevents misfires and workpiece damage. The M12™ Pin Nailer drives 23-gauge headless pin nails ranging in length from 1/2” to 1-3/8” and features all-day run time with up to 750 pin nails per charge when paired with an M12™ REDLITHIUM™ CP1.5 battery pack (sold separately). This battery-powered pin nailer also features a magazine reload indicator, tool-free drive depth adjustment, reversible belt clip, LED light, battery fuel gauge, secondary work contact tip, and carries an industry-leading 3-year limited power tool warranty.
Milwaukee M12 23 Gauge Pin Nailer Kit
The MILWAUKEE® M12™ 23 Gauge Pin Nailer Kit features the most compact cordless pin nailer, combining precision and power to deliver the performance that professional carpenters and remodelers demand, without the hassle of a compressor hose or gas cartridge. The 23 gauge pin nailer provides unmatched productivity and accessibility into tight spaces and confined corners with a lightweight, ergonomic design. The nitrogen air spring mechanism allows the nailer to consistently sink pin nails at proper depth into hard or softwoods while leaving small, clean nail holes. The double-action trigger and non-marring precision point tip allow for sequential driving and accurate pin placement into delicate trim pieces. The dry-fire lockout feature prevents misfires and workpiece damage. The M12™ Pin Nailer drives 23-gauge headless pin nails ranging in length from 1/2” to 1-3/8” and features all-day run time with up to 750 pin nails per charge when paired with an M12™ REDLITHIUM™ CP1.5 battery pack. This battery-powered pin nailer also features a magazine reload indicator, tool-free drive depth adjustment, reversible belt clip, LED light, battery fuel gauge, secondary work contact tip, and carries an industry-leading 3-year limited power tool warranty. This 23-gauge pin nailer kit includes (1) M12™ 23GA Pin Nailer, (1) M12™ Charger, (1) M12™ REDLITHIUM CP1.5Ah Battery Pack, and a Contractor Bag.
Milwaukee M12 3/8 in. Crown Stapler (Bare Tool)
The Milwaukee M12™ 3/8 in. crown stapler delivers a true hand tool replacement. The 2447 is designed to drive a range of 3/8 in. flat crown staples (1/4 in. – 9/16 in.) through an array of materials and substrates. At just 3.0 lbs. and 7.5 in. long the compact design allows for great access into tight spaces and convenient tool belt portability. An easy to squeeze trigger design significantly reduces fatigue associated with traditional hand staplers. Integrated sequential and contact actuation trigger design provides increased productivity and seamless changing between firing modes. The 2447 is compatible with all Milwaukee M12™ batteries, and carries Milwaukee's 5-year limited power tool warranty.
Milwaukee M12 3/8 in. Crown Stapler-Reconditioned (Bare Tool)
The Milwaukee M12™ 3/8 in. crown stapler delivers a true hand tool replacement. The 2447 is designed to drive a range of 3/8 in. flat crown staples (1/4 in. – 9/16 in.) through an array of materials and substrates. At just 3.0 lbs. and 7.5 in. long the compact design allows for great access into tight spaces and convenient tool belt portability. An easy to squeeze trigger design significantly reduces fatigue associated with traditional hand staplers. Integrated sequential and contact actuation trigger design provides increased productivity and seamless changing between firing modes. The 2447 is compatible with all Milwaukee M12™ batteries. Battery and charger are sold separately. Reconditioned product.
Milwaukee M12 600 MCM Cable Cutter Kit
The MILWAUKEE® M12™ 600 MCM Cable Cutter Kit simplifies cable cutting by fitting comfortably in crowded panels. The M12™ cable cutter generates 5,000 pounds of force and fits into tight spaces to effortlessly cut, leaving a clean, installation-ready cuts. A built-in LED light illuminates the line of the cut. The compact size and scissor-style jaws enable cutting in crowded panels without looping, ratcheting or long arms. The 2-speed gear case has the power to cut through large-diameter cable and switches into high speed to slice quickly through a variety of smaller, common wire types. This cable cutter is powered by the M12™ REDLITHIUM™ Battery which delivers up to 150 cuts of 600 MCM copper per charge. This kit includes one M12™ Battery, a multi-voltage charger and carrying case.
Milwaukee M12 Cable Stapler (Bare Tool)
The MILWAUKEE® M12 Cable Stapler delivers unmatched stapling performance in the most compact battery-powered solution leading to a faster, more efficient rough-in process. The compact, lightweight design provides users with access to tight stud bays and improved ergonomics when stapling overhead or during difficult-to-reach situations. Moveable cable guides ensure proper alignment and the coil-spring mechanism consistently sinks the staples to the appropriate depth when fastening NM-B Sheathed Cable (14, 12, 10 AWG) and low voltage cables, supporting peak stapling productivity. Only compatible with the Milwaukee 1" insulated staples (sold separately), the M12 Cable Stapler gives the user the run-time needed to sink up to 1,200 staples on a fully charged M12 CP2.0ah battery.
Milwaukee M12 Cable Stapler (Bare Tool) with 1inch Staples 600qty Bundle
The MILWAUKEE M12 Cable Stapler delivers unmatched stapling performance in the most compact battery-powered solution leading to a faster, more efficient rough-in process. The compact, lightweight design provides users with access to tight stud bays and improved ergonomics when stapling overhead or during difficult-to-reach situations. Moveable cable guides ensure proper alignment and the coil-spring mechanism consistently sinks the staples to the appropriate depth when fastening NM-B Sheathed Cable (14, 12, 10 AWG) and low voltage cables, supporting peak stapling productivity. the M12 Cable Stapler gives the user the run-time needed to sink up to 1,200 staples on a fully charged M12 CP2.0ah battery (sold separately) . Only compatible with the Milwaukee 1" insulated staples that are included in this bundle. The MILWAUKEE® 1” Insulated Cable Staples are used for fastening electrical cables to wood surfaces during the electrical rough-in process. Only compatible with MILWAUKEE® M12 Cable Stapler (2448). UL/CUL approved for single or double stacked 14-2, 14-3, 12-2, 12-3, 10-2, 10-3 (single only) NM-B cable installation. Also suitable for use with low voltage cables such as CAT3, CAT5, CAT6, and Coax. Each package includes 600 staples.
Milwaukee M12 Cable Stapler Reconditioned (Bare Tool)
The MILWAUKEE® M12 Cable Stapler delivers unmatched stapling performance in the most compact battery-powered solution leading to a faster, more efficient rough-in process. The compact, lightweight design provides users with access to tight stud bays and improved ergonomics when stapling overhead or during difficult-to-reach situations. Moveable cable guides ensure proper alignment and the coil-spring mechanism consistently sinks the staples to the appropriate depth when fastening NM-B Sheathed Cable (14, 12, 10 AWG) and low voltage cables, supporting peak stapling productivity. Only compatible with the Milwaukee 1" insulated staples (sold separately), the M12 Cable Stapler gives the user the run-time needed to sink up to 1,200 staples on a fully charged M12 CP2.0ah battery. Reconditioned product.
Milwaukee M12 Cable Stripper Kit for Cu RHW / RHH / USE
The Milwaukee® M12™ cable stripper kit for Cu RHW / RHH / USE vastly improves the cable stripping experience. With no exposed blades, the cordless cable stripper provides safer stripping than with a knife. The cable stripper's compact, right-angle design enables users to maneuver it more easily in tight spaces with less strain on the wrist. The bushing design and adjustable depth gauge deliver cleaner, more accurate and consistent strips across all sizes. The cable jacket stripping tool is not only compatible with all Milwaukee bushings but is also compatible with competitive quick-change bushings. In addition to the battery-powered stripper, this kit contains 8 bushings for copper RHW, RHH, and USE cables, one M12™ REDLITHIUM™ CP2.0 battery, an M18™ & M12™ multi-voltage charger, and a carrying case.
Milwaukee M12 Cordless Copper Tubing Cutter (Bare Tool)
The MILWAUKEE® M12™ Copper Tubing Cutter cuts up to 10X faster than conventional cutters and gives users up to 200 cuts on a single charge thanks to ultra-efficient gearing. This is the industry's first cordless battery-powered copper pipe cutter and was engineered with plumbers, mechanical contractors, and remodelers in mind. The copper tubing cutter runs at 500 RPM, giving users unmatched cutting speed and the patent-pending cutting mechanism automatically adjusts the diameter to cut Type K, L and M copper pipes from 3/8” to 1” (OD from ½” to 1-1/8”). This close quarters copper tubing cutter has a unique rotating cutting head that allows users to cut installed copper piping with as little as 1-1/2” clearance. The lightweight pipe cutter features an in-line design, providing users with a longer reach and reduced wrist strain when working in confined spaces and has a built-in LED light that illuminates the cutting surface. The metal cutting head is corrosion and rust resistant and sealed for water protection, while electronic overload protection and unibody construction provide additional durability. An onboard, real-time battery fuel gauge helps users monitor the charge precisely, so there’s less downtime on the job.
Milwaukee M12 Cordless Lithium Ion PVC Shear Reconditioned (Bare Tool)
Cutting faster, cleaner and closer than traditional methods, the new M12™ cordless lithium-ion PVC shear utilizes a super sharp stainless steel blade for burr-free cuts, slices through 2 in. PVC in as fast as 3 seconds, and offers an offset blade to cut PVC mounted to a stud or close to a wall. Powered by the Milwaukee® M12™ lithium-ion battery, the new PVC shear is able to cut over 200 times on a single charge. Reconditioned product.
Milwaukee M12 Cordless Lithium-Ion Palm Nailer (Bare Tool)
The Milwaukee® M12™ Cordless REDLITHIUM™ Palm Nailer provides enormous value to those working without access to compressors or electrical outlets. It uses REDLITHIUM batteries for power, driving with 2.2 ft-lbs of energy and 2,700 Blows per Minute (BPM). Because the Milwaukee palm nailer does not rely on cords, it makes an excellent choice for those working in spaces with limited clearance. The tool features all-metal around the gears that protect it from bumps and impacts, and it includes an LED light that shines down on the area where you plan to work. We recommend the M12 palm nailer for its on-unit technology, too. It features REDLINK™ Intelligence, which functions like a brain inside the tool by connecting the battery, charger and tool to protect against overloads. It also displays the remaining charge with an easy-to-read gauge. The 6D-16D magnetic collet allows users to better control nails before placement, offering users the ability to complete their nailing tasks with a single-hand.